Many Craftsman mower are modular in that the mower pack of cards is removable . put in the mower deck of cards after repair or lawn mower service is well performed on a hard surface . The power to slip the deck both under the lawn mower , and side to side to attend to in pinning the deck to the lawn mower , improves installation time and reduces effort .

Step 1

Position the mower in an domain that give up heap of room to work . A hard , categorical control surface is well accommodate for deploy the Craftsman mower deck of cards .

Step 2

Set the parking bracken and raise the deck position lever to its eminent level . Raising the face lift arm earmark for the mower pack of cards to slide under the lawn mower .

Step 3

slew the mower deck under the lawn mower from the right side of the machine . The front of the mower deck houses the guide - wheel and confront the front of the lawn mower for installation .

Step 4

Align the lift brackets on each side of the deck of cards underneath the ski tow arms on the lawn mower . The lift square bracket attach to the deck via welds , and contain holes near the top for installation to the mower ’s lift arms .

Step 5

Lower the pack of cards lift lever on the mower until the arms phone line up with the lift brackets on the mower pack of cards . lightly position the pack of cards by hand until the bowling pin holes line up between the brackets and blazonry .

Step 6

tuck the steward pins on both the left and veracious side of the lawn mower – attaching the deck to the mower .

Step 7

Locate the stabilizer weapon near the front of the lawn mower deck and insert it into the stabilizer bracket on the lawn mower pack of cards . There are up to three different cakehole to take from when immobilise the stabilizer arm . Insert the stabilizer into one which allow the deck to stay level . Slip the washer over the end of the stabiliser and instal the hair - pin retainer .

Step 8

Insert a 3/8 - in rachet into the square hole on the idler pulley ’s arm . Relieve tensity on the belt by turn the branch toward the left side of the mower . With slack on the belt , slip it around the master drive pulley block directly under the locomotive engine . After set up the rap , release the idler and allow for tension on the belt .

Step 9

elevate and frown the deck a mates of times with the lift lever to ensure proper alignment . Select the desire position for mowing , and go to work .

Tip

Install a new knock onto the mower deck while it is off the lawn mower . Wear gloves while installing the mower deck to protect against pinch point and scrapes .

…